Gripperrods Long Pin Dual Gripper – 152.4m Box (500ft)

Ideal for use in:

Living Rooms

Dining Rooms

Bedrooms

Stairs/halls

Dickinson Moore long pin concrete gripper is pre-nailed with specially tempered nails (threaded for holding power), pre-driven into the gripper and is suitable for use with all carpet types. The ideal product for stretch fit carpet installations with thicker carpets & underlay over 12mm. Dickinson Moore gripper is made from high grade resin bonded plywood, five ply (6mm) thickness, machined on one edge to a defined angle and penetrated from the underside by two rows of passivated pins. The Pins are set at an angle of 60deg to eliminate pull-out and bending, even when power stretching. The carpet backing is then held in place by the pins to allow for correct tension

Type: Gripper
Suitability: Domestic/Contract
Application: Nail gripper approximately 6mm away from the face of the skirting so that the carpet can be tucked into the gap between the gripper and skirting board.
Pack Size: 500Ft (100 x 5ft lengths) 152.4metres
Pin Size: 6.4mm
Thickness: 6mm
Manufacturers Guarantee: see terms & conditions